bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
Q & A Icon

Replacement Hub-Drum Assemblies And Brake Assemblies For A Dexter 8-201 Hub Assembly  

Question:

I have a 2017 flagstaff classic super lite and I need to replace brakes and hubs on both axles. My hubs have a number 8-201 on them. Would you give me a list of the parts I need. I looked at you 2-801 hubs but you have a bunch of different part numbers for what looks like the same part.

0

Expert Reply:

The Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ you were looking at is likely what you'll need for your 8-201 hubs but it wouldn't hurt to doublecheck some measurements. First being axle capacity, this hub assembly is designed for 5,200lb to 6,000lb axles. You'll be able to find the capacity of the axles on the axle tag that should be somewhere on the axle tube.

From there you'll want to check the bolt pattern for the wheel studs to make sure that it matches up with your wheels, these have a 6 on 5-1/2" bolt pattern. Next you'll want to check the bearings to see if they match, these use Inner bearing # 25580 and Outer bearing # 15123. This should be labeled on the bearings, but you can also measure the spindle at points C and D with a set of calipers to confirm.

If everything matches up then the # 8-201-9UC3-EZ would be the correct fit. For the matching brake assemblies you'd need part # 23-105-106 for manual-adjust or part # AKEBRK-7-SA for self-adjusting.

expert reply by:
0
Kevin C
Spindle Bearing Measurements
Spindle Bearing Measurements
(click to enlarge)
Ask The Experts a Question >>

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>