Parts For Single Bar Roof Rack & Single Bar Ladder Rack on Retrax XR Tonneau on 2024 GMC Sierra 3500

Question

Question:

Hello. I am looking to piece together a bike hauling system for my truck. I have a 2024 GMC Sierra 3500HD Double Cab 8’ bed with a Retrax Pro XR. I would like to have a single roof crossbar that I can install front bike axle brackets to and then a single crossbar for the t-slot rails on my tonneau cover so I can install a mount for the rear tire to secure to. I tow a 5th wheel rv and having an 8’ bed gives me the clearance to do this set up with the bike above the bed. Any guidance with products would be greatly appreciated.

asked by: Paul B

0

Expert Reply:

Okay, this is going to be quite a few parts but I'll go ahead and list out everything for a single bar roof rack and single bar ladder rack for your 2024 GMC Sierra 3500 and the RetraxPRO XR Hard Tonneau Cover # RTT-80485:

Roof Rack Parts
- Yakima BaseLine FX # Y83TR

- BaseClip Fit Kit # Y06124

Ladder Rack Parts
- Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y47TR

- Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y67TR

- Tonneau Cover Adapter Kit # Y01155

- Yakima HD Crossbar # Y95FR

- Replacement Crossbar Installation Hardware # Y42XR

- Replacement Wrench Set # Y56FR

expert reply by: Kyle S

0

Answer 1

I have a solution for you, and in some complete roof rack kits the Yakima Jetstream crossbars #Y00425 will come with the Adapter and Seat for Yakima JetStream Crossbars - Qty 1 #8880637. However, if you're adding crossbars to existing towers…

view full answer...

Answer 2

The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-58 weight capacity at any height will be 500lbs on-road, 300lbs off-road, and 800lbs static. Note: The maximum weight ratings will be reduced by 40% when using crossbar spreads less…

view full answer...

Answer 3

Hi Steve, thanks for the question, and we do indeed have the correct mounting panel for the Redarc Tow-Pro Liberty #RED24FR on your 2007 Toyota Tacoma. What you need is the following: - Mounting Panel for Redarc Tow-Pro Trailer Brake Controller…

view full answer...

Answer 4

It sounds like you are asking if a Reese weight distribution system head will fit on a Draw Tite weight distribution shank which the answer to that is yes.

view full answer...

Answer 5

Yes, here is a photo of our etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98905 installed on a 2023 Toyota Tacoma.

view full answer...

Answer 6

The Redarc Tow-Pro Liberty Brake Controller item #RED24FR will work great with your Tacoma TRD. It is a proportional brake controller that responds based on your Toyota's deceleration. The harder you brake the stronger it engages your trailer…

view full answer...

Answer 7

I recommend going with the Redarc Tow-Pro Elite #RED44FR for towing with your 2022 Toyota Tacoma for a few reasons; not only does it have a totally customized install when you pick up the Adapter #RED99FR and Mounting Panel #331-TPSI-002, but it also…

view full answer...

Answer 8

Yes you do need a brake controller installed in your 2020 Toyota Tacoma to control the travel trailer's electric brakes as there isn't one installed in your truck from the factory and there's no other device that can actuate the brakes.…

view full answer...