Can Extra Material of Classic Accessories RV Class B Cover be Cinched Up

Question

Question:

The 117inch height is over a foot more than my 210 Roadtrek. can the extra be cinched under the sides?

asked by: Ed

0

Expert Reply:

Yes, the Classic Accessories RV Cover part # CA80104 has adjustments built into it so that the extra material could be cinched down and the fit would be tight.

expert reply by: Jameson C

0

Answer 1

The Classic Accessories #CA80104 would be a great cover for your 2008 Roadtrek 210 Popular. It's the correct fit and it is breathable as well like you are looking for.

view full answer...

Answer 2

The Classic Accessories Deluxe PolyPro III Heavy-Duty Cover #CA80104 should be a great fit for your 2008 Roadtrek 210 Popular RV (based on the specs I was able to track down), but I do recommend taking a measurement of the Roadtrek's overall…

view full answer...

Answer 3

Classic Accessories does not require the removal of antennas when installing the Classic Accessories Deluxe PolyPro III #CA80104. As long as you don't have a huge whip antenna like what CB radios use and it just a standard, smaller type antenna…

view full answer...

Answer 4

The Classic Accessories Deluxe PolyPro III Heavy-Duty Cover for Class B RVs #CA80104 is originally in a 26" x 19" x 13" box so you can expect it to be roughly these dimensions when folded back up.

view full answer...

Answer 5

The Classic Accessories Deluxe PolyPro III Heavy-Duty Cover for Class B RVs part #CA80104 only weighs around 20 lbs so it won't be hard to lift up onto the vehicle for installation.

view full answer...

Answer 6

In order to recommend the correct cover I'll need you to take a measurement of your Class B RV. You'll need to measure from your front bumper to your rear bumper including the spare tire if you have one. Once you let me know what you have I…

view full answer...

Answer 7

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

The Adco SFS AquaShed RV Cover #290-12230 is going to be the best fitting cover for your 2023 Ford Transit with the medium roof and the 19-1/2' overall length. The Classic Accessories #CA80104 you found is for vans at least 20' in length…

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Can Extra Material of Classic Accessories RV Class B Cover be Cinched Up

Product Page this Question was Asked From

Continue Researching