BAK Revolver X4s that Fits 2023 Ford F-150 5-1/2 ft Bed

Question

Question:

I have a x4s revolver on my 2023 short bed tremor. Could I use the cover on 2023 f150 ? If so I would want to purchase new rails. Thank you

asked by: Martin A

0

Expert Reply:

There isn't a way to swap the BAK Revolver X4s onto your 2023 Ford F-150 5-1/2 ft bed. Only solution would be an all new cover like the part # BAK56ZR which fits the Ford. The covers and all of the hardware are different between the two trucks is why.

expert reply by: Jameson C

0

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 3

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 4

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 5

Usually ladder racks use the inside edge of the top of the bed site to attach to the vehicle, but luckily there are exceptions to that. The Thule TracRac SR is typically compatible with tonneau covers that mount to the inside edges of the truck bed.…

view full answer...

Answer 6

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 7

There are roll up tonneau covers that can work with the Truxedo Elevate Ladder Rack part #TX96NV but since I don't know which one you have specifically it's hard for me to say. Here's a list of all of the covers this is designed to fit:…

view full answer...

Answer 8

Tonneau covers and ladder racks can be compatible with each other when they do not use the same mounting points on the truck bed rails. Both tonneau covers and ladder racks can mount either inside the bed rails or on top of them. As an example, the…

view full answer...

Answer 9

The ability to use a tonneau cover is going to depend on how that factory tonneau cover mounts to the bed of your 2020 Ford F-150. If the cover just clamps onto the inner lip of the bedrails and doesn't cover up your stake pockets then you can…

view full answer...

Answer 10

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 11

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 12

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

BAK Revolver X4s that Fits 2023 Ford F-150 5-1/2 ft Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching