Can The Tray Be Removed From A MORryde RV Cargo Sliding Tray

Question

Question:

Can the tray be removed leaving the slides?

asked by: Kale

0

Expert Reply:

Yes, the tray portion of the MORryde RV Cargo Sliding Tray # MR64FR can be removed from the tracks.

expert reply by: Kevin C

0

Answer 1

We definitely can help! To add lift to your MORryde RV Cargo Tray #MR63FR, we do have a kit for that. The part you need is the Height Adjustment Kit for MORryde RV Cargo Sliding Trays #MR34VR. With these brackets, you can adjust them to provide you…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

With the weight of your camper I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL35FJ. I prefer these as they have the internal jounce bumper which helps to reduce the bounce that is often associated with towing a trailer and…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, you can replace your current Lippert Equa-Flex equalizers with the MORryde AllTrek 4000 Equalizers #MR29DR on your 2018 Highland Open Range. The yellow octagons on the front and rear are a for correcting the alignment of the axles and are not…

view full answer...

Answer 6

The Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap #TH29200XT is not actually meant to be installed into top tracks. This crossbar system is actually meant to be installed in fixed points on your camper shell so it's not going to…

view full answer...

Answer 7

Yes, the tray portion of the MORryde RV Cargo Sliding Tray #MR64FR can be removed from the tracks.

view full answer...

Answer 8

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

view full answer...

Answer 9

The Air Lift systems that fit your 2022 Ford F-350 are single rear and dual rear wheel specific so for your dually you need the following kit: - Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL86KV I also recommend checking out a…

view full answer...

Answer 10

Since you are pulling a trailer that weighs around 8,500 lbs. you would just want to stick with the Firestone Ride-Rite Air Helper Springs #F35FV (5,000 lb.). You really only need to spend more for the Firestone Ride-Rite Red Label Extreme Duty Air…

view full answer...

Answer 11

I recommend using the B&W Ball and Safety Chain Kit #BWGNXA2061 for the factory puck system on your 2020 Ford F-350 Super Duty. I like this kit of the Curt #C60692 and Reese #RP30137 options because it uses a handle to secure the gooseneck hitch…

view full answer...

Answer 12

We do have a potential option for you. Unfortunately there are not any "plug and play" options that will work with the Blue Ox Towbar Wiring that you have already installed. You would have to go in and unplug the Blue Ox Harness in order to…

view full answer...

Can The Tray Be Removed From A MORryde RV Cargo Sliding Tray

Product Page this Question was Asked From

Continue Researching