Will Using the Dexter Spring Conversion Kit Provide Additional Clearance for ATV Trailer Fenders
Question:
I have a single axle utility trailer, that when 2 atvs are loaded, about 900 pounds, the tires rub the fenders. Would the spring over kit add more clearance between the tires and fenders? thanks
asked by: John H
Helpful Expert Reply:
Yes the Dexter Trailer Suspension Over - Under Conversion Kit # K71-384-00 that you referenced will provide additional clearance for loading your ATVs on your single axle trailer.
This kit is a bolt on kit but Dexter strongly recommends tack welding the spring seat. This kit is intended to be used on 2-3/8 in diameter axles, please make sure this is compatible with the diameter of your existing axle.
Using this kit will change the geometry of your trailer slightly. It will provide the additional clearance that you will need, and your tires should not rub the fenders. Be aware of the change in height when towing your trailer as the handling will be different.
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Article: How to Raise Your Travel Trailer Height
- Shop: Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: Trailer Axle Beam with Easy Grease Spindles - 95" Long - 3,500 lbs
- Q&A: Over-Under Axle Conversion Kit for 2-3/8-Inch Trailer Axle
- Q&A: Availability of Over/Under Leaf Spring Conversion Kit for 2015 Forest River Clipper Travel Trailer
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Moving Leaf Springs from Below the Trailer Axle to the Top of the Axle
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Video: Camco Grills and Fire Pits - Grills - CAM57245 Review
- Video: etrailer Scissor Stabilizer Jacks with Handle Review
- Q&A: Parts Needed to Add Brakes to Single Axle Boat Trailer
- Video: Dexter Axle Trailer Suspension - Leaf Spring Suspension - K71-384-00 Review
- Q&A: How to Determine if Scissor Jack Will Fit Camper
- Q&A: Is Capacity of Stabilizing Scissor Jacks Combined or For Individual Jack
- Search Results: axle flip kit
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation
- Video: Review of HE Parmer Trailer Fenders - Steel Fender with Backing for 13-14 Inch Wheels - HP79VR
- Search Results: propane cover
- Search Results: rv vents and fans
- Search Results: rv roof vent cover
- Video: Dexter E-Z Flex Triple Axle Suspension Kit Installation - 2006 Jayco Select Camper