Recommended 2K Trailer Axle with 4" Drop and 5-Lug Hubs
Question:
Hello, Your item# e84YR, I would like to know if its available with a 4 drop? If not any would be helpful. Im trying to get a low access height. Thanks
asked by: Bill H
Expert Reply:
The Trailer Axle with Idler Hubs # e84YR is a bit of a smaller axle and while I do have a solution for you, all of our 2K axles that have a 4" drop are a bit larger.
For your application I recommend going with the following parts:
- Timbren Axle-Less Trailer Suspension # ASR2KHDS05
- Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-EZ-K (you need 2 of this)
The Timbren kit gives you an upgraded alternative to standard trailer suspension parts and since it doesn't have a crosstube the clearance directly under the trailer is better than what you get with a standard axle.
I've attached some review videos that you can reference to see what this trailer suspension kit looks like.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Drop - 4 Bolt Flange - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Article: How to Measure a Trailer Axle
- Q&A: How Far Between the Back of the Wheels When Installed on the 60" Trailer Axle with Idler Hubs?
- Q&A: Axle Tube Diameter and Spring Seat Dimensions of etrailer Brand e84YR 2000 lb Capacity Axle
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Pintle-Hitches
- Article: Where to Position the Trailer Axle?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: What Is The Speed Rating On The Kenda 5.30-12 Bias Trailer Tire # AM30710
- Q&A: Brackets to Mount CE Smith Trailer Fenders
- Q&A: Axle Upgrade for my Harbor Freight 1720 Utility Trailer
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Q&A: Torque Spec for U-Bolts on 2K Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long