Determining The Correct Replacement Trailer Suspension Components To Upgrade Ride Quality
Question:
I just want to be sure I have everything measured correctly, so I am attaching the measurements that I got. One more thing. The frame is 2" wide and that would leave 1" on either side of the frame when the spring is touching the frame. Is that acceptable? See attachment.
asked by: Jim
Expert Reply:
We don't currently have a match for the equalizer so if yours is still in good shape then I recommend keeping it to avoid having to change up your suspension even more to get it to sit correctly. We can swap it out but you'll likely need to swap out the leaf springs and shackle straps to different lengths as well and we'd need to get it in place first and then measure to determine the correct sizes.
You can still swap out the shackle straps and bolts for wet bolts and and thicker straps with the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps # MR46ZR.
The frame not completely matching the diameter of the SumoSprings isn't going to matter. You will need to choose the correct kit for your suspension setup though. Since you have 3,500lb axles you can use the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket # TSS-107-40 if your axles sit below the leaf springs. If your axles are above the leaf springs then you'll need part # TSS-106-40 instead. With the # TSS-106-40 you'll need 6" - 8-5/8" of clearance between the frame and leaf spring plate.
Products Referenced in This Question
SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Underslung
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Jounce Springs
- 3000 lbs
- 4000 lbs
- 5000 lbs
- Single Axle
- SuperSprings Intl
more information >
SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Overslung
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Jounce Springs
- 3000 lbs
- 4000 lbs
- 5000 lbs
- Single Axle
- SuperSprings Intl
more information >
Product Page this Question was Asked From
MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- 2-1/4 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Best Cushioned Equalizer Replacement for Equalizer that is 6 inches Wide
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: How Do I Measure Axle Spread for Upgrading The Trailer Equalizers?
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Article: How to Raise Your Travel Trailer Height
- Q&A: Which MORryde X Factor Braces Do I Need for a Tandem Axle Trailer w/ CRE3000 Equalizers?
- Q&A: Determining Correct MORryde CRE3000 Equalizer Kit For 2019 Heartland Fuel 352 5th Wheel Trailer
- Q&A: Correct Orientation of MORryde ALLTREK 4000 Shock Absorbing Equalizers
- Q&A: Recommended Cushioned Equalizer Replacement Options For Factory Equalizer 6" Wide and 4" Tall
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle