Is The Inno Shaper Platform Compatible With A Thule Wingbar Roof Rack With A 30" Spread

Question

Question:

I have a 2020 Honda HRV with flush rails and installed Thule WIngbars that are around 30 inches apart. Is the mounting hardware on Item # INXA569 adjustable to fit my crossbars?

asked by: Lyndon B

0

Expert Reply:

Yes, the Inno shaper 100 # INXA569 will indeed fit the Thule Wingbars on your 2020 Honda HRV. The platform will work with a crossbar spread of 20" to about 40". I can also confirm that the mounting hardware will be compatible with the channels on the Thule Wingbar.

expert reply by: Jesse M

0

Answer 1

Even with the Malone AirFlow2 Roof Rack #MPG215 on your 2019 Jeep Cherokee you do need to use a basket like the Inno Shaper #INXA568 with the Thule Interstate Rooftop Cargo Bag #TH869 because otherwise part of the bag would rest on the panoramic…

view full answer...

Answer 2

Yes, we do have versions of the Inno Shaper 80 and 100 that will fit into the top channels of your Thule Wingbar/Aeroblade crossbars. For the 100 you'd want the #INXA569 and for the 80 you'd want the #INXA568 and you'd be set!

view full answer...

Answer 3

I recommend using the RhinoRack #RLN1 which is 47-1/2" long x 31-1/2" wide unstretched, so it's going to be the closest match for your Inno Shaper 80 #INXA568 and will allow you to secure your cargo into the basket. For straps, I…

view full answer...

Answer 4

It looks like you have the Thule Aeroblade bar. The T-slot dimensions are 1/2 inch wide for the top of the opening and 3/4 inch wide at the bottom. The T-slot is 1/8" inch tall.

view full answer...

Answer 5

The Inno Shaper cargo baskets can either attach to the top channel of a crossbar or by clamping around a square bar. We have great cargo baskets that do fit the bars of your 2018 Subaru Crosstrek but none from Inno. Instead I would recommend the…

view full answer...

Answer 6

The Large Yakima OffGrid #Y07139 Cargo Basket uses crossbar clamps that are designed to be universal. They will fit virtually any crossbar shape, including most aftermarket and OEM crossbars. I was not able to find any schematics online that would…

view full answer...

Answer 7

The manufacturers do not typically provide the static weight limit of the roof racks. A lot of that reasoning is that the static load limit is typically higher than the cars roof capacity. What I can tell you is that the Malone AirFlow2 Roof Rack…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

There are roll up tonneau covers that can work with the Truxedo Elevate Ladder Rack part #TX96NV but since I don't know which one you have specifically it's hard for me to say. Here's a list of all of the covers this is designed to fit:…

view full answer...

Answer 10

Yes, the Truxedo Elevate Ladder Rack System part #TX96NV does fit your 2024 Chevy Silverado 5-3/4 foot bed that has the bed protection package. It will so work with the BAKFlip MX4 tonneau part #BAK448130 as well.

view full answer...

Answer 11

Yes there is! The Touring Awning Room #ARB84FR will be the correct room add on for the 8' 2" Long x 6' 7" Wide ARB Awning #ARB34FR. These rooms are great because they include a waterproof floor, and zippered access doors on every…

view full answer...

Answer 12

Both the Rhino-Rack Vortex Aero and Thule WingBar roof rack systems have very nice features and would work well for your 2014 Hyundai Santa Fe. Both systems are designed to work on vehicles that have the flush mounted rail system. As far as the…

view full answer...

Is The Inno Shaper Platform Compatible With A Thule Wingbar Roof Rack With A 30" Spread

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching