What Does Brake Controller Install Harness for 2022 Entegra Class A Look Like

Question:

I have a 2022 Entegra class A motor home on a Ford F-53 chassis and looking for a brake control wiring adaptor for a Drawtite brake controller. I cant seem to find one or how to search for this vehicle can you recommend an adaptor?

asked by: Bob

Expert Reply:

The 2022 Ford F-53 does not have a custom fit brake controller wiring harness available for it yet so you'd need to cut off the connector and wire it to the controller. I attached a picture of what the harness looks like though.

expert reply by: Jameson C

Brake Controller Harness on 2021 Ford F-53 Chassis
(click to enlarge)

Rick S.

2/28/2024

Can u tell me the wire colors on the Entegra to tie the white/black/red/blue to?

Jameson C.

2/29/2024

@RickS We don't have that info but we can help you figure it all out. You'd need a circuit tester like the part # PTW2992 to test the wires on the Entegra brake controller wiring and wire accordingly. The wire that is hot all the time runs to the black wire of the controller, the one that has voltage only when brake pedal is applied runs to the red wire. Now probe the black wire and touch the other probe to the remaining two wires. The one that lights up the tester gets run to the white wire and the remaining wire gets ran to the blue.