Availability of Equal-i-zer Shank For 2-1/2" Receiver With 8" Rise/Drop
Question:
I am looking for an equalizer hitch with 8 inch and 2.5 inch tube. Do you sell these? I need the whole kit.
asked by: Julie A
Expert Reply:
It sounds like you're looking for an Equal-i-zer Weight Distribution Shank that fits a 2-1/2" hitch and has either an 8" rise or drop. We have the # EQ90-02-4800 with an 8" rise and 4" drop if you need an 8" rise. If you need an 8" drop you can use the # EQ94FR with a 13" rise and 9" drop.
If by whole kit you mean the entire weight distribution hitch, you will need to choose one based on the loaded tongue weight of your setup. Your tongue weight should fall into the range of the system. You can use the shanks listed above with any of the following:
-Equal-i-zer Weight Distribution # EQ37041ET (up to 400 lbs of tongue weight)
-Equal-i-zer Weight Distribution # EQ37061ET (200-600 lbs TW)
-Equal-i-zer Weight Distribution # EQ37101ET (600-1,000 lbs TW)
-Equal-i-zer Weight Distribution # EQ37121ET (800-1,200 lbs TW)
-Equal-i-zer Weight Distribution # EQ37141ET (1,000-1,400 lbs TW)
In addition to the hitch and the shank you will also need a 1-7/8" 12pt Thin Walled Socket # ALL643216 for hitch ball installation.
I have attached some review and installation videos below, along with a helpful article on how to measure tongue weight for your reference.
Products Referenced in This Question
1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel
- Hand Tools
- Ratchets and Sockets
- Sockets
- SAE
- 3/4 Inch Drive
- 1-7/8 Inch
- Alloy Steel
- Powerbuilt
more information >
Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 4,000 lbs GTW, 400 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 200 lbs
- 300 lbs
- Equal-i-zer
more information >
Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Equal-i-zer
more information >
Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- Equal-i-zer
more information >
Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 14,000 lbs GTW, 1,400 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1200 lbs
- 1300 lbs
- Equal-i-zer
more information >
Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 9 Inch Drop
- Square - 12 Inch Rise
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1600 lbs TW
- 16000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 4 Inch Drop
- Square - 8 Inch Rise
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Upgrading to 2-1/2 Inch Shank or Using a Reducer Sleeve with Equal-I-zer Weight Distribution System
- Article: Converting Your RV Water Heater to Tankless
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Availability of 14,000 lbs GTW, 1,400 lbs TW Equal-i-zer Weight Distribution Hitch With 2-1/2" Shank
- Q&A: Does Fresh Water Tank Need to be Full When Adjusting Equal-i-zer 16k Weight Distribution Hitch
- Q&A: Options For Replacing A Broken 7-Way Connector
- Q&A: 2-1/2 Inch Weight Distribution Shank for a EAZ-Lift Weight Distribution System
- Q&A: What Does E6 Furrion Thermostat Indicate
- Q&A: Replacement Weight Distribution Shank For A 10,000 Pound Reese Weight Distribution Hitch
- Article: Trailer Hitch Receiver Sizes
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Calculating Portable Generator Power Needs