Parts Needed to Convert a Boat Trailer From Bunk Boards to Roller Bunks for a 21' Boat
Question:
I am looking to replace the bunkers on my boat trailer. My boat weight is 3,200 lbs. what set if rollers would you recommend. I have a 2001 21. Ft Rinker Captiva. Thank you.
asked by: Tom C
Expert Reply:
Each pair of Boat Trailer Deluxe Roller Bunks # DL21740 have a 2,500 lb. capacity. Your bigger consideration will be the length because with needing multiple pairs of rollers, you will have enough weight capacity.
Typically you will want to match the length of your current bunks with the news ones. But a good rule of thumb is to have at least 50% of the length of your boat. I have included enough bunk rollers and parts needed for that below.
Bunk Rollers
- Boat Trailer Deluxe Roller Bunks # DL21740 (x3) gives you 12' of rollers, slightly over 50%.
You can either attach these to your current bunks or you can use the CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks # CE10003G-4 (x3) with the CE Smith U-Bolts # CE15283GA-4 (x3).
Products Referenced in This Question
CE Smith Bolster and Swivel Bracket Assemblies for Roller Bunks - Galvanized Steel - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 10 Inch Tall
- 2 Inch Tall
- 1-3/4 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 1-1/4 Inch Long
- CE Smith
more information >
CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4
- Boat Trailer Parts
- U-Bolts
- 3-1/16 Inch Wide
- 1/2 Inch Diameter
- Galvanized Steel
- 3-13/16 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
Boat Trailer Deluxe Roller Bunk - 4' Long - 10 Sets of 3 Rollers - by Dutton-Lainson
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Continue Researching
- Q&A: Can I Convert Regular Bunks To Roller Bunks
- Q&A: What Is Center-To-Center Dimension Of Slots On Dutton-Lainson Boat Trailer Roller Bunk Bracket
- Q&A: What Types of Installation Hardware Should be Used to Install Dutton-Lainson 4-Foot Roller Bunks
- Q&A: How to Attach Roller Bunks # DL21741 to 6 Ft Wooden Bunks on a Boat Trailer
- Q&A: How to Covert my Roller Bunks to Wooden Bunks on my Boat Trailer
- Q&A: How Wide is Channel of Boat Trailer Standard Roller Bunk # DL21754 that Installs on Board
- Q&A: Can the Boat Trailer Standard Roller Bunks Be Cut Down
- Article: RV Cell Boosters, How Do They Work?
- Article: Boat Trailer Showdown: Bunks vs. Rollers
- Article: How to Measure for Trailer Hitch Drop
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Boat Trailer Guides: Which are the Best?
- Article: Trailer Wiring Diagrams
- Article: Determining Trailer Tongue Weight