Recommended Weight Distribution System for a 4,700 lbs Trailer
Question:
I have a 20 foot two axle travel trailer, 2 ball, 2850 dry weight, 4700 gvwr. What weight distribution hitch do I need? Im pulling it with a 1/2 ton rated for 7000 lbs trailer weight.
asked by: Coy H
Expert Reply:
Weight distribution systems are chosen based off of tongue weight, which is typically 10% - 15% of your trailer's total weight. Your 4,700 lbs trailer would have a tongue weight range of 470 lbs - 705 lbs. With this in mind, I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control item # FA94-00-0800. This system has a tongue weight range of 400 lbs - 800 lbs which would great with your trailer.
The Fastway e2 item # FA94-00-0800 has built in sway control that will keep your trailer in line with your 1/2 ton truck while you are going down the highway. This is especially helpful when you make sudden moves or get passed by a semi. Included with this system is a 2" shank and a 2" hitch ball.
I have linked an installation and review video below so you can see the functions of this system and how to get it set up. Please feel free to email me directly with any additional questions.
I would not recommend the Curt MV Weight Distribution System item # C17050 you were looking at. It does not have sway control or a hitch ball and the capacity is well below what you will need. It'll be essentially useless if you are even close to 4,000 lbs and have weight towards the front of your trailer or on the tongue.
Products Referenced in This Question
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- 600 lbs
- 700 lbs
- Fastway
more information >
Product Page this Question was Asked From
Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- 500 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Determining Trailer Tongue Weight
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Q&A: Can You Reverse with the 6K Curt MV Weight Distribution System
- Q&A: Is There a Trailer End 4-Round With Wires
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Comparing B&W Continuum And Reese Strait-Line Weight Distribution Systems
- Q&A: Weight Distribution System For A 2020 Kia Telluride Towing a 5,000 lb Trailer
- Q&A: Weight Distribution Recommendation for 600 lb for Combined Trailer Tongue and Rear Tow Vehicle Cargo