Replacement Galvanized Hubs For Dexter 8-213 on 5,200 lb Axle
Question:
My hubs say Dexter 8-213 I want to replace them with galvanized hubs. How do I make sure the new hubs and bearings will fit. I think it’s a 5200 lbs axle
asked by: Kermit H
Expert Reply:
Dexter now uses hubs rated for 6,000 lbs for their 5,200 lb axles (as they are discontinuing that specific capacity), but the 6k rated Dexter 8-213 hub will fit the spindle on your 5,200 lb axle as they use the same bearings. The correct galvanized Dexter 8-213 hub for your 5,200 lb axle is the following:
- Dexter Trailer Idler Hub Assembly # 8-213-51UC1-EZ
If you want to verify you can do so by taking apart your current hub assembly and looking at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. Or, if you are unable to find them, use a digital caliper and measure your spindle where the bearings ride; you should get inner bearing 25580 (1.75" inner diameter) and outer bearing 15123 (1.25" inner diameter).
The # 8-213-51UC1-EZ does come with the bearings, races, and seal so you don't have to purchase those separately.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles - 6 on 5-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- EZ Lube
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles - 6 on 5-1/2 - Galvanized
- Video: Review of Dexter Trailer Hubs and Drums - Idler Hub - 8-213-51
- Q&A: What Are the Specifications of the Dexter Trailer Idler Hub 008-445-15
- Q&A: Can Two Different Hubs that Use the Different Bearings Be Used on Same Trailer Axle
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-213-51UC1-EZ Review
- Search Results: dexter trailer hub
- Search Results: boat trailer axle kit
- Search Results: dexter hub
- Search Results: 15123 bearing
- Shop: Dexter Trailer Idler Hub for 6,000-lb Axles - 6 on 5-1/2" - Galvanized
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Shop: Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
- Shop: DeeMaxx Trailer Idler Hub for 6,000-lb Axles - 6 on 5-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 6,000-lb Axles - 12" Diameter - 6 on 5-1/2 - Galvanized
- Video: Powerbuilt Tools - Vehicle Tools - ALL648591 Review
- Search Results: dexter brake cylinder
- Search Results: master cylinder cap
- Search Results: brake actuator parts
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Trailer Maintenance Schedule
- Q&A: Recommended Replacement Brakes for TDE 46304 Brakes
- Q&A: Recommended E-Z Lube Hub and Rotor Assembly for 6K Axles
- Q&A: Galvanized 6 Lug Trailer Hub For a Spindle With 2.125 Grease Seal and 1.75/1.25 Bearing Sizes
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Q&A: Can a Hub/Drum Be Switched Out For An Idler Hub On a 6,000 Lb Trailer Axle
- Article: Trailer Tire Sizing
- Article: How to Determine Tire/Wheel Diameter
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub