Replacement Shock for Model 10/6 Actuator on Trailer
Question:
Hi. I’m needing a shock for my brake actuator. I’m not sure exactly what model/brand I have. It’s either a Dexter or Titan. Either a model 6 or 10. I’ll provide pics. Also, how do I gain access to the shock? Thank you I can’t get pics to upload. Hope this enough info
asked by: Ancil R
0
Expert Reply:
The good news is that the Model 19 and Model 6 Titan/Dexter actuators use the same shock so you'll want the part # T1242600. The two big bolts on the side of the actuator need to come off so that you can slide out the inner member and access the shock.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Shocks
- Dexter
more information >
Continue Researching
- Q&A: Replacement for Gabriel Shock Model 610712
- Article: How to Measure a Trailer Axle
- Q&A: Recommended Replacement For A JVR9000R RV Stereo System With Three Cameras
- Q&A: Option to Replace Jensen JRV9000R
- Q&A: Taillight Converter Needed To Separate Brake Lamp and Turn Signal Circuits
- Q&A: Does a 2022 Chevrolet Silverado 3500 Short Bed Need a Sliding 5th Wheel Hitch
- Q&A: 40' Wishbone Trailer Wiring With A Ground Wire Running Down Both Sides
- Q&A: How To Convert A Wishbone Trailer Wiring Harness To A Regular 4-Flat Trailer Wiring Harness
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Hand Winches