Replacement Brass Connector for Dexter Disc Brake Actuators
Question:
Im looking for the brass fitting that goes into the rear of brake actuator, brake line. Tie down model 750
asked by: Wes L
Expert Reply:
Since Tiedown is out of business I wasn't able to find what size of a fitting goes on the back of the brake actuator. I am pretty sure that is a common size amongst actuator fittings though. The Replacement Brass Connector for Dexter Disc Brake Actuators item # T4750300 you were looking at is a 1/8" to 3/16" fitting. This would be our only replacement option.
Sorry I don't have more specific information. The parts brake down in the manual for the Tiedown 750 doesn't have that part listed or the fitting sizes of the master cylinder.
Product Page this Question was Asked From
Replacement Brass Connector for Dexter Disc Brake Actuators - Qty 1
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Brake Lines
- Brake Line Fitting
- Brake Line Components
- Dexter
more information >
Continue Researching
- Q&A: Does Replacement Brass Connector # T4750300 Fit Dexter DX6.6 Actuator
- Q&A: Trailer Hub Recommendation to Replace Dexter 8-155
- Q&A: Replacement Master Cylinder For Titan Model 60 W/ 23361 Master Cylinder
- Q&A: Availability of Trailer Hitch for 2023 Mercedes-Benz GLE 350
- Q&A: Does The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout Have A Manual Lockout Option
- Q&A: Finding a Hub for a Very Old Trailer with 6 Lug Bolt Pattern # 1779 inner and # 2788 Outer Bearings
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide