Is Replacement Installation Hardware for Longview Custom Towing Mirrors Made of Metal or Plastic

Question

Question:

Are these replacements made of metal or plastic?

asked by: Romeo

0

Expert Reply:

The Replacement Installation Hardware for Longview Custom Towing Mirrors # KLV-1710 is made of plastic and will be exact replacements for what you currently have.

These are for the Longview Custom Towing Mirrors # LVT-1700 which fit a 2003-2021 GMC Savana or a 2003-2023 Chevy Express.

expert reply by: Jon G

0

Answer 1

I believe that the hook arms and locking nuts for the Longview Custom Towing Mirrors #LVT-1700 that you referenced is the Replacement Hardware for Longview Towing Mirror LVT-1700 #KLV-1710.

view full answer...

Answer 2

The hooks of the #LVT-1700 that secure it to the mirror housing are plastic. The knobs of the hooks are also plastic.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 9

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

view full answer...

Answer 10

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Is Replacement Installation Hardware for Longview Custom Towing Mirrors Made of Metal or Plastic

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching