No Power to Furrion Vision S Wireless RV Backup Camera System on Trailer But Works in Vehicle

Question:

2023 Sunset Trail Furrion camera bracket and wiring was installed from the factory. Bought the camera plugged it in inside my car works just fine. Plugged into the rear of the trailer it has no power. Bought the furrion Power adapter plugged it in turn my lights on and still no power to the rear camera. Any advice?

asked by: Ronald J

Expert Reply:

I have run into this issue before when installing the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision part # FOS43TASF, the problem was that the wires for the plug were reverse at the factory. I recommend pulling the plug for the camera out from the body until you have access to the wire nuts, then switch the wires and retry. If you have a test light you can use this to confirm as well.

expert reply by: Conner L