Will The Pace Edwards Contractor Rack Fit A 2013 Ram 1500 With A BAKFlip G2 Tonneau Cover

Question

Question:

Would this rack fit on a 2013 Ram 1500 short bed with a G2 Bakflip tonneau cover?

asked by: Jon

0

Expert Reply:

Pace Edwards Contractor Racks, like the # 311-CR4005 you were looking at, are only compatible with Pace Edwards branded tonneau covers with t-slot or explorer series rails. For a 2013 Ram 1500 short bed I have the following options, depending on bed length:

For a 5-1/2' bed you'll need the Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails # 311-JED77A01 along with the Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack # 311-CR3004.

For a 6-1/2' bed you'll need the Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails # 311-JED7833. If you have a standard cab then you'll need the Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack # 311-CR3005. For an extended cab you would use part # 311-CR4005.

If you'd prefer to keep your current tonneau cover then you would need to use one that mounts in the stake pockets of your bedrails like the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever # TH43003XT-784EX for a 5-1/2' bed or part # TH43003XT-501EX for a 6-1/2' bed.

expert reply by: Kevin C

0

Answer 1

The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack #311-CR6008 is designed to slide into the T-Tracks found in explorer series rails so it would require a tonneau cover. It is also not a fit for your 2022 Ford F-350 though so the closest…

view full answer...

Answer 2

That is a great question! The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack will work with a Pace Edwards tonneau cover as long as it has the Explorer Series Rails. If you have an 8' bed you can use the Full-Metal JackRabbit #311-FED7936…

view full answer...

Answer 3

For your 2012 Ram 2500 long bed with the crew cab the correct Pace Edwards Contractor ladder rack would be the part #311-CR6008.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 12

Usually ladder racks use the inside edge of the top of the bed site to attach to the vehicle, but luckily there are exceptions to that. The Thule TracRac SR is typically compatible with tonneau covers that mount to the inside edges of the truck bed.…

view full answer...

Will The Pace Edwards Contractor Rack Fit A 2013 Ram 1500 With A BAKFlip G2 Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching