Will Inno Velo Gripper INRT201 Work With Factory Cargo Rails In 2004 Toyota Tundra?  

If you wanted to use the Inno Velo Gripper Bike Rack #INRT201 and then lock the bike to the truck your best option would be a cable lock like part #e98891. You would need to route the cable through the frame of your bike and then through either a…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

There are roll up tonneau covers that can work with the Truxedo Elevate Ladder Rack part #TX96NV but since I don't know which one you have specifically it's hard for me to say. Here's a list of all of the covers this is designed to fit:…

Yes, the Inno Velo Gripper Bike Rack #INRT201 will indeed fit your 2017 Chevy Colorado.

I went out to our warehouse to take a few measurements on both the clamp and mounting plate for the Inno Velo Gripper Bike Rack #INRT201. The black plate measures 4 inches long and 2-3/8 inches wide with a small lip that measures 1 inch wide. The bed…

For the 2020 Chevy Colorado I recommend to use 2 sets of the Inno Velo Gripper Bike Rack for Truck Beds - Clamp On part #INRT201 which easily clamp on the bed rail and hold the bike with it's rod and ratcheting strap system. We have had a lot of…

The Inno Velo Gripper Bike Rack for Truck Beds, part #INRT202 is designed for trucks just like your 2012 Frontier. I have attached a photo of the #INRT202 for you. The small square plate( pointed out with an arrow in the photo) attached to the eye…

I recommend 2 sets of the Inno Velo Gripper Bike Rack for Truck Beds - Clamp On part #INRT201 for the bed of the 2020 Chevy Colorado. The Inno Gripper does not require cutting the bed liner in the new truck (if the truck has a bed liner) like with…

The Inno Velo Gripper #INRT201 will still work with the bike front wheel turned as long as the Gripper has something to grab onto. If it was just one Gripper holding the whole bike then there might be a stability problem. But there are 2 included so…