Will The Spindle Grease Seal Set # BB60005 Fit With a Spindle Diameter of 1.462 Inches?
Question:
Will these seals work for a spindle dia of 1.462 inch. The OD is 1.980 inch
asked by: Brian T
0
Expert Reply:
The Spindle Grease Seal Set # BB60005 will not fit on your spindle if the landing for the grease seal is 1.462" in diameter. The seals this comes with have an inner diameter of 1.375" which is smaller than the measurement you gave. Be sure to verify this is the diameter of the grease seal landing and not the stub behind the grease seal as it can be larger. This kit is designed for use with Unique BT Hubs.
expert reply by:
Bud M
0
Product Page this Question was Asked From
Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.375 Inch I.D.
- 1.98 Inch O.D.
- Bearing Buddy
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Is Movement of Armature Arm of Trailer Brake Assembly Normal
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Bearings, Seals, Hubs For 2021 Riverside Retro 135 With 3,500 lb Axle
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: How to Find Trailer Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Bearing Kit For A 2021 Winnebago Voyage 3235RL With Dexter 5,200 lb Axles
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Measure for Trailer Hitch Drop
- Article: Towing a Trailer? Let's Talk About Brake Controllers