Will Coupler Lock Fit Atwood 8700 Coupler

Question

Question:

Will this Coupler lock fit an Atwood 8700 coupler?

asked by: Krista

0

Expert Reply:

So long as your Atwood 8700 coupler uses a 1-7/8" or 2" ball, has a flat lip with a width of no more than 3-3/4" and no thicker of 5/16" then you can use the Trailer Coupler Lock # e98897.

expert reply by: Kyle S

0

Answer 1

We do have mirrors available however, the snap over custom molded towing mirrors are not an option for your 2018 Lexus GX 460. My suggestion is the K-Source Universal Dual Lens Towing Mirrors, #KS3990. The mirrors in this set feature flat glass for…

view full answer...

Answer 2

For the yoke style couplers my favorite coupler lock is the Fastway part #FA86-0015-312. We have found that this is the most universal of the locks we carry and also works the best. It will work great on your yoke coupler part #AT80072. I attached a…

view full answer...

Answer 3

We have a lock that will work for you, though the #e98897 won't work with a coupler that has a maximum of 4-1/4 width. Instead, what you'll need is a surround lock that fits over the coupler where the hitch ball attaches and is wide enough to…

view full answer...

Answer 4

Yes, we can ship the Space Dock 2" Receiver Adapter for Torklift Palomino Landing Pad Bumper part #TLA7900 to you in Canada! However, the quoted shipping costs does not include all brokerage fees and duties. Taxes are not included and all prices…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

The newer Chevrolet and GM pickup trucks have a known power deficiency issue with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras #FCE48TASL-05. There is likely nothing wrong that you did, the problem is the…

view full answer...

Answer 12

The K-Source tow mirrors #KS3990 would work great on your 2023 Ford Expedition. We had a chance to install them on a similar 2018 Ford Expedition and found they installed easily, worked great, and the highest reviewed option we know fits.

view full answer...

Will Coupler Lock Fit Atwood 8700 Coupler

Product Page this Question was Asked From

Continue Researching