Wiring In A Roadmaster EvenBrake ICX Transmitter On A 2015 Jeep Wrangler
Question:
I am setting up a second car for towing a 2015 Wrangler JK Sport with parts I recently bought from you. The brake controller is an EvenBrake. I am using and external lighting system something like magnetic lights. I know that I need to connect pin 1 of the ICX transmitter to the cold side of the brake light switch. I have a couple of questions: 1. What does cold-side mean? Does it mean that when the brake is not applied the connection is open and when the brake is applied that connection provides 12V? 2. What does pin 1 on the ICX transmitter expect on pin 1 open when the brake is not pushed and 12V when it is pushed? 3. Do you happen to know what pin I should be connecting to on the brake light switch on my 2015 jeep jk
asked by: Don J
Helpful Expert Reply:
The cold side of the brake light switch is the wire that only receives power when the brake pedal is depressed. When the brake pedal is depressed the circuit closes sending the signal out that the brakes are being applied. When you connect to pin 1 of the ICX Transmitter of the Roadmaster EvenBrake # RM-9400 it will send 12v power to that pin any time the brake pedal is depressed.
The brake light switch wire on your 2015 Jeep Wrangler is usable and is colored white and brown. You'll splice into this wire and run it to terminal 1 on the ICX Transmitter.
Products Referenced in This Question
Roadmaster Even Brake Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Not Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Roadmaster
more information >
Product Page this Question was Asked From
Replacement Wiring Harness for Breakaway Switch of Roadmaster BrakePro Flat Tow Brake System
- Accessories and Parts
- Tow Bar Braking Systems
- Wiring
- Wiring Harness
- Roadmaster
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Parts Needed to Flat Tow 2023 Ford F-150 with Blue Ox Tow Bar
- Q&A: Can Brake Away Switch Cable Included W/ Blue Ox Patriot Braking System Be Extended?
- Article: How to Choose a High-Low Adapter
- Q&A: Best Flat Towing Set Up for a 2020 Chevy Equinox Premier
- Q&A: Does Blue Ox Patriot Braking System Need to be Reset After Shutting Off
- Q&A: Replacement Breakaway Switch for Roadmaster BrakeMaster Systems
- Q&A: Troubleshooting a Roadmaster Brake Pro 9300 that Cycles Every 3-1/2 Minutes
- Q&A: Troubleshooting Roadmaster Even Brake Monitor And Transmitter
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: What Is Flat Towing and How to Ditch the Trailer
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)