Is The CE Smith Idler Hub Compatible With DeeMax Slip On Disc Brake Rotor For 3,500LB Axle?
Question:
The description says Idler Hub, can I use this with my slip on rotor disc brake axle?
asked by: Max W
Expert Reply:
Yes, the CE Smith Trailer Idler Hub Assembly # CE13515 can be used with a slip on rotor like the DeeMaxx Disc Brake Kit # DE42FR uses. We do also have the DeeMaxx Trailer Idler Hub # DE36VR if you would like to stick with the same manufacturer for these components. One nice feature about the DeeMax idler hub is they stamp the bearing and seal information into the hub so you will not have to pull the hub apart if you forgot what size parts you need. You will need the Inner Bearing # L68149, Outer Bearing # L44649 and Grease Seal # 58846 with the Deemax idler hub as they are not included.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
DeeMaxx Trailer Idler Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- DeeMaxx
more information >
DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 1/2 Inch Studs
- 3500 lbs Axle
- 14 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- DeeMaxx
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- CE Smith
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What is the Inner Diameter of Trailer Bearings L44649 and L68149
- Q&A: What Type of Grease is Recommended with CE Smith Trailer Idler Hub Assembly # CE13515
- Q&A: Proper Wheel Lug Nut Torque For a CE Smith Trailer Idler Hub Assembly # CE13515 with 15" Wheels
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Bearing Grease Compatible With CE Smith Prepacked Hub Kits
- Article: How to Measure a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Double-Eye Trailer Suspension System Review