Will the Replacement Schrader Valve Fitting for Firestone Coil-Rite Springs Work with Air Lift 1000?

Question

Question:

Will part number F3438 fit on airlift 1000 HD bag?

asked by: Mark O

0

Expert Reply:

Yes, the Replacement Schrader Valve Fitting for Firestone Coil-Rite Air Helper Spring # F3438 will work with the Air Lift 1000 Heavy Duty Air Helper Springs for Coil Springs # AL60828HD as it is designed to work with standard 1/4" tubing.

expert reply by: Bryce D

0

Answer 1

There isn't a special tool for removing the #AL21848 from the air bags. You'd need to use a wrench. If you can't make a complete revolution you'd need to take smaller turns based on the limited access. You may need to remove the…

view full answer...

Answer 2

Air Suspension would be a great way to address the sagging issue you are encountering when you are towing your Lance 1685 Travel Trailer. For your 2021 Ram 1500 I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce…

view full answer...

Answer 3

For your 2022 Ram 1500 I recommend the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle #AL88375. The LoadLifter 5000 Ultimate air springs have internal bumpers, so you get the adjustable load support of…

view full answer...

Answer 4

I try to steer people away from the Air Lift 1000 for Coil Springs, like part #AL60828HD for your 2022 Ram 1500, just because the springs can pinch the bags where the Air Lift LoadLifter 5000 #AL57375 just require the 5 psi minimum to help keep the…

view full answer...

Answer 5

The only Air Lift Air Helper Springs available for your 2019 Ram 1500 Big Horn 2wd are the Kit #AL60828HD. The LoadLifter 5000 #AL88375 you found will only fit on 4wd trucks. The Springs #AL60828HD are rated for up to 2,100lbs of capacity which is…

view full answer...

Answer 6

Yes the Air Lift LoadLifter part #AL88375 that you referenced does fit the 2019 Ram 1500 new body style like you have.

view full answer...

Answer 7

The HD air bags from Air Lift part #AL60828HD are thicker material than the non-HD bags which is why you can't slip them between the coils of the rear suspension. Instead you have to push the bag through the top of the coil spring.

view full answer...

Answer 8

The Air Lift 1000 Heavy Duty Air Helper Springs #AL60818HD are going to fit the 2011-2018 Ram 1500 and 2019-2021 Ram 1500 Classic. The Air Lift 1000 Heavy Duty Air Helper Springs #AL60828HD are going to fit the 2019-2022 Ram 1500(excluding TRX). The…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 11

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Will the Replacement Schrader Valve Fitting for Firestone Coil-Rite Springs Work with Air Lift 1000?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching