Replacement 2" Coupler Recommendation for Off-Road Trailer
Question:
Is there a product that I can use to covert a 2 coupler on the trailer to have the freedom of movement that a lock and roll hitch provides. I am looking at overlanding with a tear or small trailer with rooftop tent.
asked by: Emlyn H
Expert Reply:
We do have a few options for you, but they do all require you to modify your trailer in a way so just keep that in mind.
To retain a 2" trailer coupler you need the Ark Articulating Off-Road Coupler # AR44FR. This has the standard 2" hitch ball connection but it is attached to an articulating head so it can handle off-road situations.
To install this onto your trailer you need to weld on a 2" receiver like the Curt # E-9, and I recommend using the Anti-Rattle Trailer Hitch Receiver Lock # 63232 to not only help keep the Ark coupler secured to your trailer, but also to help keep the shank from moving around too much in the weld on coupler.
Aside from this you'll need to change to a full on Lock N Roll coupler which is a great option but it does mean that whatever tow vehicle you're using needs to have the specialized ball mount for this connection. I recommend going with the Ark so you don't have to think about the Lock N Roll ball mount side of things if you plan on using a different tow vehicle.
Products Referenced in This Question
Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span
- Trailer Hitch Lock
- Universal Anti-Rattle Lock
- Keyed Unique
- Fits 2 Inch Hitch
- Spring-Loaded Pin
- 3-1/2 Inch Span
- Lets Go Aero
more information >
Combo Bar 6" with 2" Trailer Hitch Receiver - Unpainted
- Hitch Fabrication Parts
- Receiver Tube
- 6 Inch Long
- Raw Finish
- Fits 2 Inch Hitch
- CURT
more information >
Product Page this Question was Asked From
Ark Articulating Off-Road Coupler for 2" Receivers - Trailer Side - 2" Ball
- Straight Tongue Trailer Coupler
- Off Road Coupler
- 5000 lbs GTW
- 2 Inch Channel
- Ark
more information >
Continue Researching
- Q&A: Are Dexter Model 6 and Demco DA91 Inner Slides the Same Dimensions
- Q&A: Availability Of 33" Ark Stabilizer Jack And Dimensional Diagrams Of Similar Ark Corner Steadies
- Article: Trailer Tire Sizing
- Q&A: Weight Capacity Of The Ark Drop Down Corner RV Stabilizer Jacks # ARK77FR
- Q&A: Pintle Hook that Can be Used with Military Trailer M1101/M1102
- Q&A: Ark XO Drop Down Corner Stabilizer Jack # ARK87FR Mounting Plate Dimensions
- Q&A: Lock N Roll Articulating Coupler A-Frame Dimensions
- Q&A: Does Ark Articulating Off-Road Coupler Have a Lock
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Stability Control for Heavy Duty Vehicles
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Where to Position the Trailer Axle?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer