Availability of 6MM Security Hex Wrench For Mounting Hardware On Yakima TopShelf For EXO Carrier

Question

Question:

Hi Do you sell the hex wrench that for the small bolt that attach the upright post for the Yakima top shelf to the swing base Thanks

asked by: Les H

0

Expert Reply:

Currently the only way we carry the 6mm security wrench is in the Replacement Wrench Set # Y56FR. This is the wrench used to attach the TopShelf # Y94VR to the SwingBase # Y34VR.

expert reply by: Bud M

0

Answer 1

The Replacement Wrench Set #Y56FR contains the 10mm hex key, 6mm security hex key and 4mm security hex keys you need for your Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-5855.

view full answer...

Answer 2

The Atwood couplers have been discontinued for a bit so you'll be hard-pressed to find any replacement parts for them. We don't have any replacement parts for them anymore so I recommend just replacing the whole coupler with…

view full answer...

Answer 3

I got some information from Yakima and included a diagram of the EXO SwingBase #Y34VR, which is the base part for the EXO SwingBase 2 Tier #Y82VR. Though the measurement from the pin hole to the closest edge of the carrier is not included in said…

view full answer...

Answer 4

The Curt Dual 2" Receiver Tube Adapter #D-192 has a tongue weight capacity of 350 lbs for both hitch openings and the MaxxTow MT70070 has a max tongue weight of 400 lbs. You should note that the when you use a hitch extender/adapter like…

view full answer...

Answer 5

This is a great choice, I love the versatility that the Yakima EXO SwingBase with GearLocker Enclosed Cargo Carrier - 2" Hitches - 10 Cubic Feet, part #Y62VR, offers. I reached out to our Product Manager for Yakima and he has been told all of…

view full answer...

Answer 6

The Yakima EXO SwingBase Swing Away Hitch Extender item #Y34VR you were looking at does not reduce your tongue weight capacity by 50%. The only reduction it would cause to your 350 lbs capacity would be the 65 lbs weight of the EXO SwingBase itself.…

view full answer...

Answer 7

I have two options that will allow for you to securely attach a cooler to your Curt Cargo Carrier part #C18151. You can choose from either a cargo net or a set of cambuckle ratchet straps. A cargo net such as the Curt Stretchable Cargo Net part…

view full answer...

Answer 8

At the rear of a motorhome is much rougher than at the rear of a vehicle. This is due to the much larger distance between the rear axle of the vehicle and the rear of the vehicle that exaggerates the bumps similar to how the seats at the back of a…

view full answer...

Answer 9

The 2-inch hitches offered for your 2000 Jeep Grand Cherokee are all Class III rated, with a maximum tongue weight capacity of 500-lbs. All can be seen using the link provided. The issue that arises with use of fixed hitch adapter/steps like the…

view full answer...

Answer 10

Yes, the Curt Echo brake controller part #C51180 will fit and work great installed in the 7-way of your 2022 Ford Maverick Hybrid. You have all of the correct wiring connected to your 7-way so it would be a super simple install.

view full answer...

Answer 11

In order to convert the 4-way on a 2022 Ford Maverick to a 7-way you'll need the 4 to 7-Way with 4-Way part #ETBC7L. This kit comes with the actual adapter and everything else you need such as wires, connectors, and circuit breaker. It also…

view full answer...

Answer 12

You need to route the 12V power wire from the Curt T-Connector Vehicle Wiring Harness with #C59DR up to the battery under the hood of your 2022 Ford Maverick, which we demonstrate how to do in the linked installation video. I also recommend picking…

view full answer...

Availability of 6MM Security Hex Wrench For Mounting Hardware On Yakima TopShelf For EXO Carrier

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching