How Does Weight Distribution System Chain Hanger Attach to Reese Pole Tongue Adapter
Question:
Looking to use an equalizer hitch on a single tongue trailer. The unique thing is that the 3 x 3 tube used for the tongue has a SST tube 4inch in O.D. covering the square tube. Thus a single tongue adapter would require either cutting the SST tube to secure the product to the square tubing -or- 2 LH/RH semi circular plates would have to be machined to create a vertical side and then clamp the L-Shaped brackets to it. For the Reese hitch adapter, I do not seeinch any holes pre-drilled thru the sides to attach equalizer hitch parts to. Did I miss something as no customer identifies that they had to painstakingly drill holes thru the sides and nothing is shown by Reese or ETrailer identifying what has to be done.
asked by: Tim
Expert Reply:
It is odd that it's left out but yes you do need to drill through the outside plates of the Reese pole tongue adapter part # RP58393 to attach the brackets of the weight distribution system that you have. For the other brands like Equal-i-zer their pole tongue adapter # EQ95-01-5950 comes with the holes drilled and hardware for them. This is because they offer only one style of spring bar frame bracket and Reese has quite a few so they had to make theirs more universal.
I would also make sure you have 29 inches from the center of your hitch ball back on the tongue to make sure you have the room needed for a WD system since that's about how long all of the spring bars are.
Products Referenced in This Question
Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Pole Tongue Adapters
- Equal-i-zer
- Equal-i-zer
more information >
Product Page this Question was Asked From
Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Pole Tongue Adapters
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Reese Pole-Tongue Adapter for Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW
- Article: 5 Things to Know About Weight Distribution Hitches
- Video: Review of Reese Straight Tongue Weight Distribution Adapter - RP58393
- Video: Review 2 of Equal-i-zer Weight Distribution - EQ95-01-5950
- Q&A: How to Install a Weight Distribution System on a Straight Tongue Boat Trailer
- Q&A: Using a Weight Distribution System on a Boat Trailer With Surge Brakes
- Q&A: Towing a Boat Trailer with Folding Tongue Using Weight Distribution with Camper in Truck Bed
- Article: Determining Trailer Tongue Weight
- Article: Trailer Wiring Diagrams
- Q&A: How To Choose Between a 1,000 Psi and 1,200 Psi Electric Over Hydraulic Actuator
- Q&A: Comparing Demco Channel Tongue Trailer Coupler 12564 and DM12717
- Q&A: Sway Control Options for a Straight Tongue Trailer
- Q&A: Hitch Pin Weight Capacity and Sheer Strength
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision