Determining The Correct Replacement Idler Hub For A 1997 Starcraft Pop-Up Camper
Question:
I have a 1997 Starcraft pop up campers. OE hub is for bolts, hub has threaded holes. I want to switch to hub with studs. Will the AKIHUB-440-2-G-1K work?
asked by: Mike P
Expert Reply:
If you have a 2k axle with a 4 on 4 hub bolt pattern then yes, the Trailer Idler Hub Assembly # AKIHUB-440-2-G-1K most likely would be a compatible fit. To 100% confirm if this is the case you'll want to measure your spindle with a pair of calipers # PTW80157 at the points B,C, and D in the diagram below. You should get 1.0" exactly for C and D, and 1.249" for B. If you get something else I'll need to know the exact measurements to the decimal to determine the correct fit.
Using a hub with any slack between the bearing and the spindle can cause heat and heat is the enemy of your trailer's suspension system.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Q&A: Replacement 4 Bolt Idler Hub For 1" Spindle
- Q&A: Trailer Idler Hub Assembly For a 1" Diameter Spindle That is 4-1/4" Long
- Shop: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: How to Select Replacement Hubs for 1970s Dilly Trailer with 4-Lug Hubs
- Q&A: How to Choose Correct Axle Placement for Tandem 7K Axles with Slipper Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Measuring a Trailer Tire
- Article: Trailer Maintenance Schedule