Is There An Adapter Avilable To Go From 3" PVC To A 3" Bayonet Fitting
Question:
Hi..is there an adapter to temporarily connect a 3in pvc sewer pipe to a bayonet RV hose. I have 3in sewer pipe on my tiny home that I will eventually connect to septic, but wish to use a Rhino grey water tank for a while so I dont want to permanently glue an adapter on to it. Is there such an item, maybe something with a ring clamp or other device perhaps? Thanks,
asked by: Rick
Expert Reply:
If the outer diameter of your 3" PVC pipe is actually 3" then you could use a clamp-on coupler like # F02-2104 along with a bayonet lug fitting like # 34466V293B3S. From there you could connect your Rhino hose to the portable holding tank.
That being said, I'm sure you probably have schedule 40 PVC which has a 3" ID and 3.5" OD so the coupler wouldn't work and would require you to use a fitting like # 34466V293B3 and just glue it on. I know that's not exactly what you're wanting but you'd be able to just cut the fitting off and only lose about a half inch of your pipe when it comes time to run it out to the septic tank.
Products Referenced in This Question
LaSalle Bristol RV Sewer Termination Adapter - 3" Lug Fitting to 3" Spigot
- RV Sewer Hose Fittings
- Sewer Adapters
- Termination Adapters
- Lug
- Spigot
- Sewer Hose to Slip Hub
- 3 Inch Diameter
- 3 Inch Diameter
- LaSalle Bristol
more information >
Valterra Coupling for Rigid RV Sewer Pipe - 3" Inner Diameter
- RV Sewer Hose Fittings
- Sewer Adapters
- Sewer Couplers and Nipples
- Reducer Couplers
- Sewer Pipe to Sewer Pipe
- 3 Inch Diameter
- Valterra
more information >
Product Page this Question was Asked From
Valterra Hose Adapter w/ 3" Bayonet and Swivel Lug Fitting - Black
- RV Sewer Hose Fittings
- Sewer Adapters
- Sewer Hose Adapters
- Bayonet
- Lug
- Sewer Hose to Sewer Hose
- 3 Inch Diameter
- 3 Inch Diameter
- Swivel Fitting
- Valterra
more information >
Continue Researching
- Q&A: Recommended Sway Control Compatible With Aluminum Frame Car Hauler Trailer
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How to Install Reese 83660 Friction Sway Control Unit on Both Sides of Trailer
- Q&A: How to Make a 40 foot Long RV Black Water Dump Hose
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Recommended Replacement for Atwood GC10A-4E RV Water Heater
- Q&A: Replacement Options for 78" Long 3,500 Pound Dexter Axle
- Q&A: Braking System that Doesnt Apply Toad Brakes with Exhaust Brake
- Article: How Your RV Water System Works: A Complete Newbie's Guide
- Article: Where to Position the Trailer Axle?
- Article: 5 Reasons to Convert Your RV Lights to LEDs Today
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How (and Where) to Connect an RV Propane Grill