Recommended Hub w/ a 8 on 5-1/2" Lug Pattern and a 28580 Inner Bearing
Question:
I have an old late 70s early 80s dump grain trailer. It has 12×2inch drums. 8 lug, 1/2inch stud, 2.5inch stud spacing, Inner bearing number 28580. I think spindle #99. Looking for a new brake drum. Axle is a 58inch spring center if that helps.
asked by: Philip G
Expert Reply:
Thanks for the information. For a 8 on 5-1/2" lug hub with a item # 28580 inner bearing you'll want the Dexter Trailer Hub and Drum Assembly item # 42866UC3. This is a 12" diameter hub that fits 5,200 lbs to 7,000 lbs axles. It fits a item # 14125A outer bearing.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 14125A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 14125A
- Race 14276
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- TruRyde
more information >
Replacement Trailer Hub Bearing - 28580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 2.000 Inch I.D.
- Bearing 28580
- Race 28521
- 7000 lbs Axle
- etrailer
more information >
Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: Removing and Replacing Trailer Spindles
- Article: Where to Position the Trailer Axle?
- Q&A: Spindle Recommendation for a Square 2x2 Axle
- Q&A: What Size Trailer Hitch Receiver Opening Comes On a 2024 Chevrolet Silverado 3500?
- Q&A: Are the Safety Struts for the etrailer Cargo Carrier Included
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Article: Most Popular Wheel Bearings
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Q&A: Are #84 Spindles Threaded into the Axle?
- Q&A: Increasing Spring Tension for Lifting Ramp with Rack'Em Double Barrel Utility Trailer Tailgate Lift
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)