Troubleshooting A Furrion RV Stereo That Has Picture But No Sound

Question:

When playing dvd on Furrion 12v had led tv, get picture but no sound.

asked by: Ian F

Expert Reply:

I first recommend checking the volume and zone controls as this may just be a simple error in zoning causing you to get no sound.

If you checked that already and all the zoning is good, then you can move on to factory resetting the unit by pulling the fuse in the back of the unit next to the wiring harness. Leave the fuse out for a few minutes and then put the fuse back and check if the issue continues.

Finally, if the above does not fix the issue you'll have to delve a bit deeper by tracing the physical connections. Start with checking the connections to your speaker port and make sure they are securely connected, are undamaged, and that they have the appropriate 12V passing through.

You can use a multimeter # PT89ZR to verify voltage to the speaker connections. If you've checked all this, and all of this is good, then you likely just have a defective unit and will need to replace it.

expert reply by: Bryce D