Recommended Replacement for 4-Leaf 32" Long Trailer Slipper Springs
Question:
my Long Trailer, c. 1990, has 4-leaf hook and eye springs that are 32inch long. Do have that spring, or even in a 5-leaf? Or will the 30inch #e89SR work?
asked by: Ray N
Expert Reply:
In order to find the correct replacement leaf springs for a trailer you first need to start by noting the type whether that be slipper or double eye. Then, you'll need to measure their unloaded length via jacking up the trailer. If the springs are worn they will measure longer than their replacement. Lastly, you will need to note the axle capacity which is found on the tag in the center of the beam. Please note, the number of leaves does not really denote capacity as leaves have different thicknesses. Once you have all this info you can choose the correct replacement from the list below. The springs should be replaced in pairs as well. The 4-Leaf Slipper Spring part # e89SR that you mentioned is a 1-3/4" wide slipper spring, measures 30" long, and is designed for a 3,700 lb axle.
Product Page this Question was Asked From
4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- Flat End
- 3700 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 30 Inch Long
- Painted
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Video: Review of etrailer 4 Leaf Slipper Spring - e89SR
- Q&A: Do You Carry a 37" Long Slipper Spring With 4-Leaves For a Cox Boat Trailer?
- Video: etrailer Trailer Idler Hub Assembly Installation
- Q&A: Determining Correct Replacement Slipper Spring For Boat Trailer with 3,700lb Axle
- Shop: Trailer Hitch
- Shop: Replacement U-Bolt for 2" Wide, Square Axles - 1/2" Diameter - Zinc Plated
- Shop: U-Bolt Plate for 2" Diameter Axle, 1-3/4" Wide Spring - 1/2" Bolts - Galvanized
- Shop: U-Bolt Plate for 2" Diameter Axle, 1-3/4" Wide Spring - 1/2" Bolts - Galvanized
- Video: ABS Fasteners Trailer Shackle Bolt Locknut Review
- Video: Redline Trailer Suspension SP01-160 Review
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Search Results: 30 inch slipper spring
- Q&A: 1-3/4 Inch Slipper Spring That is 30 Inches Long and Over 2,500 lb Capacity
- Q&A: Can 3700lb 4-Leaf Slipper Spring SP-040275 Be Used On Trailer W/ 3500lb Axle?
- Q&A: 2 inch Square Axle U-Bolt Kit Recommendation for a Boat Trailer
- Q&A: Replacement Springs for Fulton Boat Trailer
- Q&A: U Bolts for a 3,500 lbs Square Axle
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Video: Curt Trailer Hitch Installation - 2008 Ford F-150
- Search Results: leaf spring bushings
- Video: Review of Titan Replacement Shock Absorber Spring Kit Titan UFP Brake Actuator - TK71-758-00
- Search Results: push rod
- Search Results: akhd~545~35~g~k
- Search Results: break away cable
- Search Results: titan model 60 actuator
- Search Results: ufp a60
- Article: How Much Does a Boat and Trailer Weigh?