Bed Base Rails For Thule TracRac SR Ladder Rack On 2022 Ram 1500 With 5-1/2 Bed

Question

Question:

I am needing the bed rails for tracrac sr on a 5.5' 2022 ram 1500. Please help me know which part I need. Thank you.

asked by: Scot C

0

Expert Reply:

The Base Rails # TH24RV are the ones needed for the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT to fit your 2022 Ram 1500 with the 5-1/2' bed(No Ram Box). These are the parts included with the Kit # TH57RV for your Ram.

expert reply by: Bud M

0

Answer 1

So the recommended Thule TracRac SR for a 2019 Ram 1500 is the part #TH43003XT-501 which for just the base rails of the you'd want the #TH21501 which should work just fine with your current uprights as long as they are the Thule/TracRac sliding…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 11

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 12

You'll need to adjust the bunks on the Malone LowBed MicroSport Trailer #MAL25FR some to account for the shape of the pontoons but yes, this trailer will have no issues working with your Blue Sky Boatworks 360 Pro fishing kayak!

view full answer...

Bed Base Rails For Thule TracRac SR Ladder Rack On 2022 Ram 1500 With 5-1/2 Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching