Recommended Kodiak Disc Brake Kit for a Dexter 10K Axle
Question:
hello good afternoon I have two dexter axes 10K and I want to know if the codiac brakes work for my axes
asked by: Yadiel A
Expert Reply:
The disc brake kit I recommend for a Dexter 10,000 Lb Axle is the Kodiak Disc Brake Kit part # K2R1058D11E which will also require the Dexter Oil Hub for 9K to 10K General Duty Axles part # 008-430-03. Please note this setup is designed for axles made after May 2013 with leaf springs so if you have something different please just let me know. The manufacture's date code is listed on the axle tag in the center of the beam.
If you don't want to reuse the old bearings/races and seals you'll need the following:
Inner Bearing part # 387A
Inner Race part # 382A
Outer Bearing part # 25580
Outer Race part # 25520
Oil Seal part # 10-51
Oil Cap part # RG04-300
Products Referenced in This Question
Dexter Oil Hub for 9K to 10K General Duty Axles - After April 2013 - Qty 1
- Trailer Hubs and Drums
- Hub
- Standard
- 387A
- 25580
- For 9000 lbs Axles
- For 10000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
- Trailer Bearings Races Seals Caps
- Seals
- Oil Seals
- 2.875 Inch I.D.
- 3.880 Inch O.D.
- Redline
more information >
Replacement Race for 25580 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 3.265 Inch O.D.
- Bearing 25580
- Race 25520
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Replacement Race for 387A Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 3.813 Inch O.D.
- Bearing 387A
- Race 382A
- 10000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 387A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 2.250 Inch I.D.
- Bearing 387A
- Race 382A
- 10000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Replacement Oil Cap Kit for 9,000-lb and 10,000-lb Dexter Axle
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 3.5 Inch O.D.
- Redline
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 - E-Coat Finish - Leaf Spring - 10,000-lb Dexter
- Trailer Brakes
- Disc Brakes
- Standard Grade
- 8 on 6-1/2 Inch
- Rotor
- 10000 lbs Axle
- 16 Inch Wheel
- Kodiak
more information >
Continue Researching
- Q&A: Disc Brake Kit Recommendation for Dexter 10k Rated Trailer Axle
- Q&A: Recommended Brakes, Bearings and Seals for Dexter 10k General Duty Axle
- Q&A: Disc Brakes for Dexter Axle Oil Hub 008-430-03
- Q&A: Disc Brake Conversion Parts For 10,000 lb Dexter Axle Made Before 2009
- Q&A: Complete Disc Brake Conversion Kit For A Tandem 10,000 Pound Dexter Axle
- Q&A: Brake Line Kit for Tandem Trailer with 10k Axles
- Q&A: Cross Reference Chart for Kodiak Trailer Disk Brake Pads to Automotive Applications
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Using a Portable Generator on RV
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Trailer Maintenance Schedule
- Article: Trailer Lighting Requirements