Recommended Hitch for a 2023 Toyota Camry
Question:
I just purchased a 2023 Camry and I am wanting a hitch to mount my bike rack. Which is the best one for my car?
asked by: Dave
Expert Reply:
The best hitch for your 2023 Toyota Camry is going to be the Curt Trailer Hitch item # C11576. This hitch is custom fit and bolts to your Toyota with included hardware.
I really like the Curt hitch because it mounts right beneath your rear bumper trim. This conceals the hitch extremely well and helps with ground clearance. This will be beneficial when you are using an accessory like a bike rack.
The Curt Trailer Hitch item # C11576 is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity, and a 200 lbs maximum tongue weight.
I have linked a couple of pictures below along with an installation video so you can see what this hitch looks like when installed.
If you are planning on towing you will also need a wiring harness item # C59236 and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Hub Recommendation for Dexter Hub 8-250
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Rooftop Cargo Carriers
- Q&A: Mounting the Aluminum A-Frame Trailer Tongue Toolbox to the A-Frame of The Trailer
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Is the Aluminum A-Frame Trailer Tongue Toolbox 350970 Waterproof
- Q&A: Replacement Double Lip Grease Seals for Boat Trailer Grease Seal # 171255UC
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: Distance From Hitch Pin Hole to Gusset on Curt Ball Mount C45112
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit
- Article: 2023 Best Gifts for Haulers & Towers
- Article: Where to Position the Trailer Axle?