Parts Needed to Add Brakes to a 3,500 lb Dexter Axle
Question:
Greeting, I am inquiring about electric brakes. I have a Legend Traylor. Dexter Axle #449972. 3500# capacity. Serial # 122003669. Tires ST 205/75 R15 5 studs Torsion suspension. I will need drums as well. Thank you for your time.
asked by: Joe B
Expert Reply:
Thank you for all of the info you listed. Since we know you have a 3,500 lb trailer axle the components you'll need to add brakes to your trailer would be the hubs part # 84546UC3 and then the brake assemblies part # AKEBRK-35-SA and you'd be set. To wire up the assemblies you'd need to use 10 gauge wire like part # 10-1-1 which we sell by the foot.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Replacement Trailer Brake Assemblies with Axletek-10-GG On Assemblies
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer