Is it Possible to Get Just the Brackets in the Storage Trunk for Malone Trailers

Question

Question:

Is possible to purchase the installation brackets only for this trailer storage application? If so, how much do they sell for?

asked by: Keith K

0

Expert Reply:

The galvanized mounting brackets w/ D-Ring tie-downs that are included with the Storage Trunk for Malone MicroSport and XtraLight Trailers # MPG481 are only available as the kit, which also includes the storage box. We do not have the brackets available as a stand-alone part.

expert reply by: Scott S

0

Answer 1

Currently Malone does not offer the mounting brackets separate from the Storage Trunk Kit #MPG481 for a MicroSport Trailer #MPG460G.

view full answer...

Answer 2

The Malone LowBed MicroSport Trailer #MAL25FR and Malone MicroSport Trailer #MPG461B2 are very similar as they are both built on the same platform. This allows them to both carry the same weight and size kayaks. The #MPG461B2 has a 30" height to…

view full answer...

Answer 3

Thank you for reaching out! The top of the lid for the Storage Trunk for Malone MicroSport and XtraLight Trailers #MPG481 is going to sit roughly 10" above the trailer frame according to my contact at Malone. I've attached a review video for…

view full answer...

Answer 4

The Storage Trunk for Malone MicroSport Trailers item #MPG481 is exactly what you need for the Malone MicroSport Trailer item #MPG461GS. This dry storage box is custom fit and mounts in the trailer's frame below the crossbars. It comes with a…

view full answer...

Answer 5

The Fishing Rod Storage Tube for Malone MegaSport Kayak Trailer part #MPG541 has an inside diameter of 6" so you can fit a couple rods/reels no problem but the exact number will vary as not all rods/reels are the same especially their dimensions…

view full answer...

Answer 6

Comparing the different Malone roof rack on wheels, you are correct in that they have similar designs with tires that can handle more weight. Of course, attaching a rooftop tent to one of these may have some complications due to the height. Rooftop…

view full answer...

Answer 7

The Malone MicroSport trailers like you have use the bearing kit part #BK1-100 that you mentioned which comes with the correct seal size. Or for a replacement hub that comes pre-greased part #34822545BX. Then for a heavy duty and waterproof grease…

view full answer...

Answer 8

We have one box that fits the Malone Microsport trailers with the part #MPG481 which installs below the bars of the rack. I attached a review video and picture for you to check out as well.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Is it Possible to Get Just the Brackets in the Storage Trunk for Malone Trailers

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching