Recommended Galvanized Trailer Idler Hub for Trailer with 3,500 Lb Axle
Question:
Hello Etrailer! I have a quick question. I have an existing axle on my boat trailer. Single axle no brakes. I want to replace the hubs/bearings whole assembly. What I know about the axle is: Spindle Size: 1-3/8 x 1-1/16 3/4 Nut 3500lb axle. Do you sell a nice affordable galvanized or none galvanized hub kit that will fit? I’m a bit confused on what will and what won’t fit. I can buy the OEM hubs but they are extremely expensive and not galvanized. Cheers
asked by: Kenny H
Expert Reply:
Yes, we do have exactly what you're looking for in the Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-545-35-G-K for standard or part # AKIHUB-545-35-G-EZ-K for easy grease which both have a galvanized finish. Furthermore, the kit comes with new wheel nuts as well so you'll have pretty much a new setup.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and Stainless Steel - 3,500 lbs
- Q&A: What Replacement Hubs do I Need for My 3500 Pound Boat Trailer Axle?
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Search Results: single leaf spring
- Video: LubriMatic Tools - Grease and Lubricants - L30416 Review
- Video: LubriMatic Wheel Bearing Grease Review
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Q&A: How to Determine Correct 3,500 lb Leaf Spring Size
- Search Results: marine grease
- Search Results: trailer bearings races seals caps
- Search Results: bearing dust cap
- Search Results: hubs
- Search Results: k2r35d
- Search Results: actuator cap
- Q&A: How to Identify Hubs on 2005 Ranger Trailer for Rotor Replacement
- Q&A: Will the Additional Width from Slip-Over Rotors Affect the Fit of the Brake Calipers on a Trailer
- Q&A: Availability Of Pre-Greased and Assembled 3500lb Idler Hub with 5 on 4-1/2 Bolt Pattern
- Q&A: Proper Wheel Lug Nut Torque For a CE Smith Trailer Idler Hub Assembly # CE13515 with 15" Wheels
- Q&A: How To Choose Correct Replacement 28-1/2" Long Leaf Springs for a Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Video: Review of etrailer Trailer Leaf Spring Suspension - 4 Leaf Double Eye Spring 4000 lbs Axle - e22YR
- Video: Review of Dexter Axle Trailer Leaf Spring Suspension - Springs - 072-017-00