Are Tire/Wheel Combos Available With 2-1/2 Inch Pilot

Question:

Can this be ordered with tires already mounted? II want Qty 3 10inch x 6inch wheels with a 2.5inch pilot hole and galvanized. Original tires were 20.5 x 8.00 - 10 but radial tires with 1100# rating would be fine.

asked by: Jim N

Expert Reply:

All of the 205/65-10 tire/wheel combos we carry have a pilot of 2-5/8 inch. The pilot hole will only matter if the wheel is secured to the hub with bolts instead of lug nuts. If that is the case then it has to be exact. If it does attach with lug nuts the pilot hole cannot be smaller than the hub it is going on but it can be larger.

If you are using lug nuts and have a 5 on 4-1/2 bolt pattern I recommend part # AM3H400. This has a galvanized steel wheel with a 205/65-10 bias-ply tire with a load range C.

If your bolt pattern is 4 on 4 then I recommend part # AM3H380. It has a 205/65-10 bias-ply tire mounted on a galvanized wheel.

We carry a galvanized steel wheel, part # AM20043, that has a 4 on 4 bolt pattern, and a 2-1/2 inch pilot.

Part # AM20048 is a galvanized steel wheel with a 5 on 4-1/2 bolt pattern, but has a 2-5/8 inch pilot.

We carry a load range C bias ply tire, part # AM1HP52. This tire is made by Kenda, has a load rating of 1100 lbs when inflated to 50 psi, and fits 10 inch by 6 inch rims.

I have attached links to a couple of articles that may help in choosing the best tires and wheels for your needs.