Dimension Of The TruRyde Spring Seat And Compatible U-Bolt Kit
Question:
What is the hole spread and u-bolt size that will fit the TRSS300?
asked by: Benjamin A
0
Expert Reply:
The Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter # TRSS300 measures 4" from end to end, and will work with a u-bolt kit, U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axle # APUBR-9.
The U-bolts in this kit measure 3" wide, 7-1/4" long, and 9/16" in diameter.
expert reply by:
Bryce D
0
Products Referenced in This Question
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 9/16 Inch Diameter
- 7-1/16 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 3 Inch
- TruRyde
more information >
Continue Researching
- Shop: Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Q&A: Replacement Trailer Suspension Components
- Article: Double-Eye Trailer Suspension System Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How to Wire a New 4-Way to a Sea Doo Trailer that Has Double Wires
- Q&A: One Inch Wide Trim For Horse Trailer
- Q&A: Trailer Hitch for 1995 Chevy G20 Van
- Q&A: When to Replace Dexter Nev-R-Lube Bearings
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: What To Look For When Buying Ratchet Straps
- Article: How to Charge a Dump Trailer Battery