Trouble Installing SuperLatch Handles for Yakima SkyBox Cargo Boxes

Question

Question:

I just received replacement Skybox handles and am finding it very hard to lock. Once side locks, but the last 25 is very hard. The other side will go to about 90 but not to the point where I can remove the key. Im afraid to force it any more for fear of breaking the key off in the lock. What can I do to resolve this?

asked by: Rick S

0

Expert Reply:

I have attached for you below some instructions for installing the SuperLatch Handles for Yakima SkyBox Cargo Boxes part # Y8880348. If you're having trouble using them after install, I suggest removing them and repeating the steps I have attached for you below to see if that solves the issue but if not please let me know and we can go from there.

Step 1. Unlock lid and open box
Step 2. Unscrew two screws that hold assembly to box from inside
Step 3. Turn key clockwise 270 degrees
Step 4. Firmly twist handle assembly counter clockwise till it removes from box then throw it away (or recycle)
Step 5. Remove new handle from packaging
Step 6. Insert key and lock the core
Step 7. Line up the two sections of the lock and then place on box
Step 8. Turn clockwise
Step 9. Screw handle in place
Step 10. Close lid
Step 11. Open lid after unlocking box
Step 12. Close lid and lock it then remove key
Step 13. intentionally left blank

expert reply by: Conner L

0

Trouble Installing SuperLatch Handles for Yakima SkyBox Cargo Boxes
(click to enlarge)

Answer 1

Roof mounted cargo boxes are weather resistant, but not waterproof. Under severe weather conditions it is possible that some moisture could get into the box. If you have something that absolutely cannot get wet, then we recommend putting it in a…

view full answer...

Answer 2

The correct replacement handles for a Yakima SkyBox made from 2009 on is the Replacement SuperLatch Handle Assemblies for Yakima SkyBox Rooftop Cargo Boxes #Y8880348. These come in a quantity of two with lock cores and keys, so you have the right…

view full answer...

Answer 3

If you have a 2009 or newer Yakima Skybox 16, then you can simply use Replacement SuperLatch Handles #Y8880348. If you don't have 2009+ wing-style latch then unfortunately there are no replacement latches for it. Yakima also does not make…

view full answer...

Answer 4

You should be able to open the box from the other side. Once you have the other side open you can then replace the handle you took to the locksmith. Unless the locksmith wasn't able to fix the issue. If you need replacement handles we carry them,…

view full answer...

Answer 5

If you have a newer Yakima SkyBox NX 16 like part #Y95AV then you should be able to just open the box from the other side. That said, there really isn't a good way to go about opening this without the latch installed. If you like you can try to…

view full answer...

Answer 6

Thanks for the photo. I see you are looking for the Replacement SuperLatch Handle Assemblies part #Y8880348 (2009+ Models Only). This installs in the hole you have attached a photo of.

view full answer...

Answer 7

It sounds like your Skybox has already been tampered with as this is not normal at all. I recommend you replace the entire assembly using the Replacement SuperLatch Handle Assemblies for Yakima SkyBox Rooftop Cargo Boxes - Qty 2 #Y8880348. These…

view full answer...

Answer 8

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 11

The Large Yakima OffGrid #Y07139 Cargo Basket uses crossbar clamps that are designed to be universal. They will fit virtually any crossbar shape, including most aftermarket and OEM crossbars. I was not able to find any schematics online that would…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Trouble Installing SuperLatch Handles for Yakima SkyBox Cargo Boxes

Product Page this Question was Asked From

Continue Researching