What Phone Carrier Do You Need to Use For the Wi-Fi and Hotspot Kit for Lippert OneControl

Question

Question:

I see a previous QandA for this item references using ATandT service. Can the LCI OneControl Hotspot work with Verizon cellular service? Thanks!

asked by: KSaff

0

Expert Reply:

No, the Wi-Fi and Hotspot Kit for Lippert OneControl Hotspot Prepped RVs # LC35UD does not work with Verizon. There is a specific LCI Data Plan required for use and that plan is available through AT&T.

expert reply by: Scott S

0

Answer 1

The MORryde Cushioned 5th Wheel Pin Box #MR84VR weighs right at 190 pounds. Due to this, it will ship freight. Just in case you needed, this is designed to fit 14,000 to 18,000 pound trailers with the Lippert 1621 and 1621HD pin boxes.

view full answer...

Answer 2

You will need the Wi-Fi and Hotspot Kit #LC35UD for your RV Camper that came prepped with the Lippert OneControl Hotspot system. The kit includes the internal and external antenna you need. You will also need to contact or visit an AT&T store in…

view full answer...

Answer 3

I reached out to my contact at B&W and confirmed that with the model 3000 base, the replacement head compatible with it is the Replacement Head Assembly for B&W Companion 5th Wheel Trailer Hitches - 25,000 lbs #BWRVC3006.

view full answer...

Answer 4

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 5

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

view full answer...

Answer 6

Yes. The MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621HD #MR84VR can be used to replace a Lippert 1621 or 1621HD; this pin box replacement is designed for trailers with GVWR up to 18,000-lbs so it is rated properly for…

view full answer...

Answer 7

Yes, the Replacement Control Panel #LC421484 is compatible with the Ground Control 3.0.

view full answer...

Answer 8

Yes, you can upgrade the 4.3 inch monitor of your Furrion setup to the 7 inch #FR47FR or the #FR97FR for the 5 inch. This will work great and give you an easy to view monitor.

view full answer...

Answer 9

I have a solution for you but the Replacement Quick Level Touch Panel for Lippert Components Level-Up Hydraulic Leveling System item #LC74FR replaces the Quick Level auto-leveling control pad for your Lippert Components Level-Up hydraulic leveling…

view full answer...

Answer 10

The Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System Item #FR47FR will replace your current 4.3" Monitor and allow you to add additional cameras to your system if needed.

view full answer...

Answer 11

The part number you mentioned is for a mounting bracket as opposed to a camera system, but I can tell you the mounting bracket is for a Furrion Vision S system, and we do have replacement monitors for that system: - 4.3" Monitor: Replacement…

view full answer...

Answer 12

The Replacement 7 inch monitor you'd looked at, part #FR47FR (which is Furrion's part #FOS07TAPK-008 is indeed a correct replacement for your original monitor. According to Furrion, it will be compatible with your existing system, as well as…

view full answer...

What Phone Carrier Do You Need to Use For the Wi-Fi and Hotspot Kit for Lippert OneControl

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching