Can the Brakes On A Motorhome Axle Be Replaced?
Question:
I have a trailer that has two mobile home axles that I would like to upgrade with new brakes and hubs that will accept normal wheels and tires. What would I need to make this conversion?
asked by: Philip S
Expert Reply:
Since motorhome axles are considered one time use, they are not designed or intended to be used with standard trailer parts. With that being said, you're going to have to replace your axles.
I know this is not what you were looking to do, however in this situation it is going to be the only viable solution for you.
I'd be more than happy to assist you find what you're needing, however I am first going to need to a couple of measurements. I'm going to need the distance from the spring center to spring center, and the distance from the hub face to hub face.
With these measurements, I'd be more than happy to help you out.
I have attached a couple of FAQs for you to check out as well.
Product Page this Question was Asked From
Replacement Trailer Brake Magnet for 12" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Brake Magnets
- 12 x 2 Inch
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can Trailer Tire Size 175/80-13 Replace Size 185/80R13
- Article: Trailer Tester Battery Replacement for Part Number 8010
- Q&A: What Colors are Trailer Brake Magnets Wires
- Q&A: Do the Colors of Trailer Brake Magnets Mean Anything
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: Using an Electric Winch to Raise and Lower a Ramp Door on a Logan Horse Trailer
- Q&A: Troubleshooting One Brake Locked Up on Trailer
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle