What's the Minimum Tongue Weight for etrailer Tongue Weight Scale for Campers and Utility Trailers

Question

Question:

What is the minimum tongue weight the scale will read?

asked by: Alex S

0

Expert Reply:

The etrailer Tongue Weight Scale for Campers and Utility Trailers part # e99044 has hash marks on the face of the gauge every 50 lbs so the minimum tongue weight the scale would need to see to read is 50 lbs.

expert reply by: Conner L

0

Answer 1

For weight distribution you want it to be rated to handle the tongue weight of your trailer when it's loaded. The tongue weight listed the trailer's spec sheet is always going to be its dry tongue weight because the loaded tongue weigth…

view full answer...

Answer 2

A weight distribution system isn't necessary for any vehicle, but it is beneficial in most circumstances because it improves safety and will keep your F-150's suspension and tires from wearing as quick because it will level the load. Should…

view full answer...

Answer 3

I may have a solution for you, but there isn't a smaller tongue weight scale available with a lower capacity. The only scale that we currently offer is the etrailer Tongue Weight Scale for Campers and Utility Trailers #e99044 with the - 2,000-lb…

view full answer...

Answer 4

There is not a recommended temperature range for installing the 7" Long White/ 11" Long Red Conspicuity Reflective Tape part #RE21T although warmer would be better as that would then help the adhesive stick better. In regards to prep work,…

view full answer...

Answer 5

The etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity, #e99044 is compatible with your Scamp as it fits 1-7/8", 2", or 2-5/16" ball couplers. If your Scamp was ordered with a jack that has a 2"…

view full answer...

Answer 6

This is a really good question. I sent it to our engineer and he told me that the gauge has a 3%,2%,3% margin of error. This means that in the first third of its range, it is +/- 3% of the actual tongue weight, the middle of its range it is +/- 2%,…

view full answer...

Answer 7

Yes, you can hook up a power inverter to input one and then shore power to input two on the Furrion Automatic Transfer Switch part #F30ATS. The dip switch will then need to be in the off position in order for the power to transfer instantly without…

view full answer...

Answer 8

I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…

view full answer...

Answer 9

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

What's the Minimum Tongue Weight for etrailer Tongue Weight Scale for Campers and Utility Trailers

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching