Parts Needed to Convert 2004 EZ Loader Boat Trailer to Disc Brakes
Question:
Hello. I have a 2004 EZ Loader boat trailer, model number 4-TEZB 23-25/27 7500. It is a tandem axle trailer with drum surge brakes on all four wheels. The actuator is a Titan Model 10 for drum brakes. The spindle measurements are 1.25 for the outer bearing LM67048, 1.75 for the inner bearing 25580 and the seal is 2.13 ID 21334TC. I would like to convert it to disc. Can you help me determine what parts I need to make this happen? Thank you for your help,
asked by: Brian M
Expert Reply:
To start you will want the Kodiak Disc Brake kit part # KOD69FR which is a Dacromet coated hub and rotor kit that fits your spindle. You will need to swap out the grease seals though to the # GS-2125DL since you have the slightly smaller spindle. Then you will lastly need to swap out the master cylinder of your Titan Model 10 drum actuator to the part # T4747100 and you'd be set.
Products Referenced in This Question
Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- etrailer
more information >
Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5.2K to 6K - E-Z Lube
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 6 on 5-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 6000 lbs Axle
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Kodiak
more information >
Replacement Master Cylinder for Dexter Model 10 and 20 Actuators - Disc Brakes
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Master Cylinder
- Dexter
more information >
Product Page this Question was Asked From
#42 E-Z Lube 4" Drop Spindle w/ Flange for 5.2K to 7K Trailer Axles - 3" Diameter
- Trailer Spindles
- EZ Lube Spindle
- TruRyde
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet and KodaGuard - 5,200 to 6,000 lbs
- Shop: Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5.2K to 6K - E-Z Lube
- Shop: Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Integrated Rotor - Dacromet - 3,500
- Shop: Replacement Trailer Hub Bearing - 15123
- Shop: 10-10 Grease or Oil Double-Lip Seals - Qty 2
- Shop: #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Shop: Grease Seals - 2.125" ID - 3.365" OD
- Video: Kodiak Trailer Brakes KCMB10HRD Review
- Search Results: weld on brake flange
- Search Results: brake lines
- Search Results: marine grease
- Video: Review of Kodiak Trailer Brakes - 12 Inch Hub/Rotor - 6 on 5-1/2 - Dacromet Disc Brakes - KOD69FR
- Search Results: surge brake actuator
- Q&A: Correct Kodiak Disc Brakes For 5,200 lb Dexter Trailer Axle Beam
- Q&A: Can Titan Model 10 Actuator be Converted to Disk Brakes from Drum
- Q&A: Can a Titan Model 10 Actuator for Drum Brakes be Used with Disc Brakes
- Search Results: kod69fr
- Video: Kodiak Trailer Brakes - Disc Brakes - K2HR526D Review
- Article: Most Popular Wheel Bearings
- Search Results: spindle
- Q&A: Can DeeMax Trailer Rotor be Machined and What is Minimum Thickness
- Q&A: Does Master Cylinder on Actuator Need to be Changed to Switch From Drum Brakes to Disc Brakes
- Q&A: Will Trailer Ride Suffer From Using Taller Equalizers
- Q&A: Upgrading Keystone Premiere Trailer to Independent Suspension with Disc Brakes
- Shop: Suspension Enhancement
- Search Results: brake calipers
- Video: Demco Brake Actuator - Surge Brake Actuator - DM8164311 Review
- Video: Sendel Tires and Wheels - Wheel Only - AM22654 Review
- Video: Titan Brake Actuator T1242600 Review
- Video: Optronics 7 Pole to 5 Pole Flat Adapter Review