Solution for Replacing OEM 7-Way With EZ Connector on 2020 Toyota Tundra

Question:

I have a 2020 Tundra with the factory tow package and factory tow connector with an integrated factory brake controller. My current connector on my truck is the 7 pin blade style with the 4 pin connector integrated next to the 7 pin/blade connector. I never use the 4 pin nor will I ever use it. But my question is, is there an adaptor that I can use to install the EZ Connector on my truck so the connection installation looks factory? See picture attached

asked by: Gregory T

Expert Reply:

I do have a solution, but there is not an adapter that would allow you to replace the OEM connection and keep the factory look on your 2020 Tundra. Since nothing will match that cutout, I have two options that will allow you to use the EZ Connector on your truck.

The first is to use the Trailer Connector Adapter # EZ94ZR. This will plug into your current 7-way and allow you to connect with your trailer's EZ Connector. However, you will either have to leave it plugged in or plug and unplug it each time you use it like your typical 7-way.

The other option would be the installation of the EZ Connector Magnetic 5th Wheel/Gooseneck Pigtail Harness w/ 7-Way Connector # 319-S7-08. To maintain a factory look on the bumper you could leave the OEM connector in place and install this on the opposite side instead of installing it in the truck bed. This will give you a clean look while also maintaining the other 4-way and 7-way should you ever need it.

expert reply by: Robin H