Replacement Switch For Electric Landing Gear on 5th Wheel Trailer
Question:
Hi, I want to replace the landing gear switch that came with my fifth wheel, a 2008 Keystone Cougar 276RLS. Is the Stromberg Carlson Electric Landing Gear, Item # LG-145236 the correct replacement part? The original switch has 6 pins, with 5 of the pins connected to wires. 2 are battery, 2 are motor and one is ground. I looked at the Item # LG-145236 wiring diagram and I believe it only has 4 pins. The 4 pins are from the motor and battery. If I need a ground, how do I set up the ground that came off the original switch? If it turns out I need to replace the landing gear assembly, what is the replacement part number for my fifth wheel? Thanks
asked by: Perry A
Helpful Expert Reply:
The Replacement Switch for Stromberg Carlson Electric Landing Gear # LG-145236 will work with Stromberg Carlson models LG-1, LG-2, LG-3, and LG-4 as well as most electric landing gear sets, including Atwood, Venture, and Lippert models. So this is likely the correct option as that covers the majority of the landing gear options for your 5th wheel. The reason that you only have 4 wires for the new switch is that the ground is done through the black wire that runs to the negative battery terminal.
More than likely you will no longer need your current ground. As long as the ground is just running to the trailer frame or ground source, you will not need it. If the ground is running to another part, please let me know what it is running to and we can take a look at if it is needed.
Product Page this Question was Asked From
Replacement Switch for Stromberg Carlson Electric Landing Gear
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Switches
- Stromberg Carlson
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Replacement Fulton Winch Strap Measuring 1-7/8 Inches by 14 Feet Long
- Q&A: Tire and Wheel Size to Replace 18.5x8.5-8 on Trailer
- Q&A: Towing a Trailer with Electric Brakes with a Semi Tractor with Air Brakes
- Q&A: Replacement for Atwood 70254 RV Landing Gear Switch
- Q&A: Parts Needed To Install Solera Awning Fabric On Slide-Out
- Q&A: What Does Hole In Rear Hanger For 2-1/2" Wide Hanger Used For?
- Q&A: How To Find the Correct Replacement Switch for a Landing Gear Set
- Article: How to Charge RV Batteries
- Article: How to Use a Roof Rack (Like a Boss)
- Article: Trailer Wiring Diagrams
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: What Size Generator Do You Need to Run an RV Air Conditioner?
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch