Correct Bearing/Race and Castle Nut Kit for 1 Trailer Spindle
Question:
Hello I need a 1 inch axle Bearing Kit for a 2006 Snowbird 8000HD trailer: Need 2 sets. Each set includes: Bearing Race 2, 1 inch Bearing 2, Grease seal 1, 2 inch axle dust cap 1 and 1 inch axle castle nut 1. The P/N in the manual is 79515. Is this available? Also Will the BT8 Kit fit? Thank You
asked by: Anthony P
Helpful Expert Reply:
It sounds like you're looking for the Bearing Kit with Grease Cap for 1" BT8 Spindles part # DL21792 which comes with two bearings, two races, a grease seal, cotter pin, and grease cap. It has everything you need for one side of an axle. It doesn't however come with a castle nut so for that you'd need the Trailer Spindle Nut 1" part # 165686.
Products Referenced in This Question
Product Page this Question was Asked From
Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Q&A: Lug Nut Torque for Loadstar ST215/75D14 Bias Trailer Tire w/ 14 Inch Galvanized Wheel # AM3S560
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Trailer Spindle Nut 1"
- Video: Review of TruRyde 1 Inch Diameter Trailer Spindle Castle Nut - 165686
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Replacement Trailer Hub Bearing - L68149
- Q&A: Replacement Hub Needed for a Karavan SL-3100-DB10-74 Trailer
- Video: TryRyde Tang Type Replacement Spindle Washer Review
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Search Results: spindle nut
- Shop: Replacement Trailer Hub Bearing - L44649
- Q&A: Seal With Dimensions to Replace 171255UC
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Q&A: How Tight Does the Castle Nut on a Trailer Spindle Need To Be
- Q&A: Tips on How to Pack Trailer Bearings with Grease
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Search Results: 3500 lb axle bearings
- Search Results: trailer hub
- Search Results: tang washer
- Search Results: 171255uc
- Q&A: Should Trailer Hub Grease Seals Be Driven Flush With Hub Bore
- Video: Kenda Tires and Wheels - Tire with Wheel - AM3S560 Review
- Video: Ratchet Tie Down Straps with Push Button Release Review
- Search Results: 1 inch spindle nut
- Search Results: timken bearings
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK1-100 Review
- Video: Inspecting and Packing Trailer Bearings with Grease Demonstration