Recommended Weight Distribution Hitch System for a 2013 Cruiser RV Enterra 292RLS Travel Trailer

Question:

I have a 2017 ram big horn pulling a 10,000 lb camper... tongue weight around 800 I believe maybe a little more! 2013 enterra 292rls Any recommendations on hitches and out sway bars! Thank you

asked by: Robert B

Expert Reply:

For your 2013 Cruiser RV Enterra 292RLS I recommend using the Equal-i-zer Weight Distribution System # EQ37120ET. This hitch is rated for trailers with a tongue weight between 800-1,200lbs and total trailer weight under 12,000lbs. Your Enterra has a dry tongue weight from the factory of 800lbs and a maximum trailer weight of 9,600lbs. Since the tongue weight will increase when you fill the propane tanks, add a battery and your gear you will want this additional capacity for your hitch. This hitch will help to evenly distribute the tongue weight across your 2017 Ram and reduce rear end sag. It also has built in 4 point sway control to reduce trailer sway. This system does not require removal of any parts to maneuver the trailer and has a lifetime warranty being Made In The USA.

You will need a 1-7/8" 12pt Thin Walled Socket # ALL643216 to install the included 2-5/16" hitch ball.

expert reply by: Bud M